Free Camera Inspection with any drain line cleaning
Licensed in GA & SC (706) 535-5757
TDS Trenchless
Residential Pipe Descaling

Residential Pipe Descaling in Augusta, GA

Weak water pressure or slow drains in an older home, with no single clog to blame? Mechanical descaling clears mineral, rust, and corrosion buildup from cast-iron and galvanized lines without replacing the pipe.

  • Free camera inspection with any drain line cleaning
  • Free estimate on every job
  • Licensed in GA & SC
Residential Pipe Descaling in Augusta, GA
MaxLiner Certified InstallerCertified on the MaxLiner CIPP system used for our trenchless pipe lining.120+ Trenchless JobsTrenchless repairs completed across the CSRA, residential and commercial.10-Year CIPP WarrantyWorkmanship warranty on trenchless CIPP pipe repairs, tiered by service.
Why Trenchless

Why Older Augusta Homes Lose Water Pressure

If you own a pre-1970s home in Augusta, North Augusta, Evans, Martinez, Grovetown, or Aiken with the original cast-iron or galvanized plumbing, weak water pressure and slow drains are usually a scale problem, not a clog problem. Decades of mineral deposits, rust, and corrosion build up on the interior wall of the pipe and narrow the diameter gradually — no single blockage, just less and less pipe to carry water through every year. Pipe Descaling is the fix that restores that interior diameter without tearing up your yard or replacing the line.

Why Older Augusta Homes Lose Water Pressure
For Homeowners

How We Descale Residential Pipe

We start with a camera inspection to see exactly how much scale has built up and where. From there, mechanical descaling tools — chain knockers and scraping heads sized to your pipe — remove the buildup from the pipe wall, and a hydro jet flush clears out everything that gets loosened in the process. A final camera pass confirms the pipe is clear and, if your line is a coating candidate, ready for the next step.

How We Descale Residential Pipe
The Detail

What Residential Pipe Descaling Costs

Residential descaling starts at $10/ft once the pipe is accessible — the same rate as any other pipe descaling job. If we need to cut into sheetrock or break through concrete to reach the line, that adds to the total, and we'll walk you through it before anything starts. Every job includes a free estimate and a quote before we begin work.

What Residential Pipe Descaling Costs
In Practice

When Descaling Leads to Epoxy Coating

On cast-iron or galvanized supply and drain lines, descaling is also the required prep step before Epoxy Pipe Coating can bond to the pipe wall — see Pipe Descaling Before Epoxy Coating for how those two jobs are scheduled together. If a camera pass shows the pipe itself is too thin or damaged to coat, we'll recommend CIPP Pipe Lining or Sewer & Water Line Excavation Repair instead of forcing a coating job that won't hold.

When Descaling Leads to Epoxy Coating
Go Deeper

Get a Free Estimate

Start with a camera inspection — free with any drain line cleaning — so the quote you get is based on what is actually in your pipe.

Questions

Frequently Asked Questions

How do I know if my home's pipes need descaling?
The most common signs are weak water pressure or slow drains throughout an older home, especially pre-1970s houses with cast-iron or galvanized lines, with no single clog you can point to. A camera inspection confirms scale buildup before we recommend descaling.
Will descaling fix low water pressure throughout my house?
When the cause is mineral, rust, or corrosion buildup narrowing the interior of your supply lines, descaling restores that lost diameter and improves flow. A camera inspection tells us whether scale is actually the cause before we start.
How much does residential pipe descaling cost?
Starting at $10/ft once the pipe is accessible. Additional cost applies if reaching the pipe requires cutting sheetrock or breaking concrete. Every job gets a free estimate and a quote before work begins.
Do I need epoxy coating after descaling my home's pipes?
Not always, but on cast-iron and galvanized lines descaling is the required prep step if you're also having the pipe coated. See Pipe Descaling Before Epoxy Coating for how the two jobs work together.
Will you need to cut into my walls or floors to access the pipe?
It depends on where the pipe runs through your home. If access requires cutting into sheetrock or breaking concrete, that's additional cost beyond the $10/ft descaling rate, and we'll explain it clearly before any work starts.
Ready When You Are

Get In Touch

Every job starts with a free estimate. Licensed in Georgia and South Carolina.

  • Free estimate on every job
  • Licensed in GA & SC
  • 10-year workmanship warranty on CIPP