Free Camera Inspection with any drain line cleaning
Licensed in GA & SC (706) 535-5757
TDS Trenchless
(706) 535-5757 Get Quote
Augusta, GA — Epoxy Pipe Coating

Epoxy Pipe Coating in Augusta, GA

Sealing corrosion and pinhole leaks in Augusta's older supply and drain lines with a MaxLiner-certified epoxy coating process.

Schedule a Free Estimate (706) 535-5757
  • Free camera inspection with any drain line cleaning
  • Free estimate on every job
  • Licensed in GA & SC
Epoxy Pipe Coating in Augusta, GA
MaxLiner Certified InstallerCertified on the MaxLiner CIPP system used for our trenchless pipe lining.120+ Trenchless JobsTrenchless repairs completed across the CSRA, residential and commercial.Licensed in GA & SCGeorgia Master Plumber MP209430 and South Carolina Mechanical Contractor CLM.113108 MC.
Credentials

Epoxy Coating for Augusta's Cast-Iron and Galvanized Lines

TDS Trenchless, a division of The Drain Surgeon Inc., has offered trenchless-specific service from our Augusta, GA base since 2011, and our MaxLiner Certified Installer credential backs the epoxy coating work we do here. Augusta's established neighborhoods carry a large stock of pre-1970s homes with cast-iron and galvanized supply and drain lines — pipe that corrodes and pinhole-leaks from the inside out long before it fails outright. Epoxy coating seals that corrosion in place without replacing the pipe.

Epoxy Coating for Augusta's Cast-Iron and Galvanized Lines
The Process

Why Descaling Comes First

A two-part epoxy is pulled or blown through a cleaned pipe to form a smooth interior coating that seals pinhole leaks and stops further corrosion. It only works on a pipe that's been properly cleaned first — Pipe Descaling is the required prep step, not an optional add-on, and for most Augusta jobs the two are scheduled together.

Why Descaling Comes First
The Detail

How Epoxy Pipe Coating Works, Step by Step

  1. 01Camera InspectionWe confirm the pipe is a good candidate for coating rather than lining or replacement.
  2. 02Isolate & Dry the LineThe line is drained and dried with heated air.
  3. 03Mechanical Descale & CleanPressurized grit cleans the interior wall (see Pipe Descaling).
  4. 04Epoxy Injection & CureThe two-part epoxy is applied and cured in place.
  5. 05Camera VerificationA final camera pass confirms the coated interior.
Pricing

Epoxy Coating Pricing and Warranty in Augusta

Epoxy pipe coating runs $125–$175 per foot for 4–6 inch pipe, with a free estimate and firm quote before work begins. Epoxy pipe coating carries a 10-year workmanship warranty. Service life beyond that depends on pipe condition and use — ask your estimator for the manufacturer specification for your specific job.

Epoxy Coating Pricing and Warranty in Augusta
In Practice

When a Pipe Is Too Far Gone to Coat

If a pipe is too corroded or thin-walled to hold a coating safely, we won't coat it — CIPP Pipe Lining or full Excavation Repair are the fallbacks, and we'll say so during the camera inspection rather than after the epoxy is in.

TDS Trenchless serves Augusta and Richmond County, plus North Augusta, Evans, Martinez, Grovetown, and Aiken, within roughly 60 miles of our Augusta base for epoxy coating and other trenchless-specific work. Call (706) 535-5757 or request a free estimate online.

When a Pipe Is Too Far Gone to Coat
Go Deeper

Every coating job includes a free estimate and a firm quote before work begins.

Start with a camera inspection — free with any drain line cleaning — so the quote you get is based on what is actually in your pipe.

Get a Free Estimate
Questions

Frequently Asked Questions

How much does epoxy pipe coating cost in Augusta?
Epoxy pipe coating runs $125–$175 per foot for 4–6 inch pipe. Every job includes a free estimate, with a firm quote before work begins.
How long does epoxy pipe coating last?
Epoxy pipe coating carries a 10-year workmanship warranty. How long the coating lasts beyond that depends on pipe condition and use — we can go over the manufacturer specification for your specific pipe during the estimate.
Do I need pipe descaling before epoxy coating?
Yes. The epoxy won't bond properly to a pipe with scale buildup still on the wall — Pipe Descaling is the required prep step, and for most Augusta jobs the two are scheduled together.
Is my pipe a good candidate for epoxy coating?
We start with a camera inspection to check. Corroding cast-iron or galvanized supply and drain lines with pinhole leaks are typically good candidates; a pipe that's too thin-walled or badly corroded needs CIPP Pipe Lining or Excavation Repair instead.
What certification backs your epoxy coating work?
Kevin Coleman holds the MaxLiner USA CIPP Installation Certification, and the company carries GA and SC contractor licensing, general liability and workers' comp insurance, and bonding.
How far does TDS Trenchless travel for epoxy coating near Augusta?
We serve Augusta and Richmond County, plus North Augusta, Evans, Martinez, Grovetown, and Aiken, within roughly 60 miles of our Augusta base.
Ready When You Are

Serving Augusta, GA and the surrounding area — request your free epoxy coating estimate today.

Every job starts with a free estimate. Licensed in Georgia and South Carolina.

Get Free Camera Inspection Call (706) 535-5757
  • Free estimate on every job
  • Licensed in GA & SC
  • 10-year workmanship warranty on CIPP